Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
hi all
i remember i had problem with STG that get wrong numbers and graphs from a cisco device and i searched the web for an answer and i saw that STG is not allways work fine! cant remember the site or link. now i cant accespt STG output and my mana...
hi all
i have about 10 AIR-AP2802I-A-K9 and a WLC 5508 with software version 8.2.151.0.
all the AP's are joined and working but the performance (download, upload speed) are very poor and never going more than 2-3 mb/s. i must say i have some 1700 ser...
hi all
can i use f3 module in a 7710 series with os 6.2(2)???
i culdnt find a simple yes or no.
I know that i cant use some features but can i use it?
thank you
hi every onei have a 4500 switch ( 4510) and this morning it restarted by it self. after reload i loged in to see ethe loggs and find somethiong i cant understand! here is the logg:ASSERTION_FAILEDAssertion failed: "Assertion failed: infra/aobjman/....
datarate is about 2-3 mb/sthe radios are all the 2802 models.the device i tested the speed is my Iphone.the speed is good in coverage of the 1700 models. its not acceptable in the area the 2802s are covering
hey
i upgraded the IOS to 03.04.02.SG RELEASE SOFTWARE (fc1) and now im OK and there is no restart. it seems its from IOSD process and in later IOSes its OK.
