Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
HI guys,can someone please assist me with below error, sh interface tenGigabitEthernet 2/1/3 transceiver detailDiagnostic Monitoring is not implemented.#sh interface tenGigabitEthernet 1/1/3 transceiver detailDiagnostic Monitoring is not implemente...
HI Guys,I have attached my network design. we have 2 DC( Active/stnaby) and both having different subnets. I have concern about failover and interface configuration. as these are in the different subnet what should be the interface IP address? can y...
I have dual ISP at the branch side (one is DSL And other is Cellular provider). I have dMvpn setup for interoffice communciation. I want to use DSL as a primary link for DMVPN and cellular as a backup. At the hub side we have got single DMVPN cloud....
Hello Experts, I need to connect Dell Force10 SFP+ to Cisco 3750x. can anyone please advise me how to achieve this? what all sfp's i need to order and any design and configuration consideration please? it would be great if someone shared their exper...
may i know what should be workaround here? do i need to get a new SFP if yes then which one should do here? its 3850 switch need to have 10 gig uplinks. or it got to do with IOS version? Thakns!
Thanks for reply. so here is my progress:- Dell Switch(SFP+)<<<<< 10 Gig Fiber cable>>> SFP-10G-SR module (cisco 3750 switch). do you think in above case i could run into compatibility issue? as both devices has got their own SFPs. Please advise ...
Thanks for your inputs.. i came across below posts:- http://www.firewall.cx/cisco-technical-knowledgebase/cisco-switches/866-cisco-switches-3rd-party-sfp.html Please advise how useful above post is?let say i already have Dell SFP, can i use same to c...
HI Guys,
I have got this working. I found WLC is sending packets putting DSCP value as 1. This DSCP value makes ASA to drop Wireless traffic(capwap) and thats why WAP never talks to WLC through IPSEC Tunnel.
I just changed DSCP value in WLC from 1 ...
