02-15-2015 01:55 PM - edited 03-07-2019 10:40 PM
HI guys,
can someone please assist me with below error,
sh interface tenGigabitEthernet 2/1/3 transceiver detail
Diagnostic Monitoring is not implemented.
#sh interface tenGigabitEthernet 1/1/3 transceiver detail
Diagnostic Monitoring is not implemented.
when i check interface details for these 10 gig ports these are in down/down status below are the IOS and SFP details:-
IOS Details:-
sh version
Cisco IOS Software, IOS-XE Software, Catalyst L3 Switch Software (CAT3K_CAA-UNIVERSALK9-M), Version 03.03.04SE RELEASE SOFTWARE (fc3)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2014 by Cisco Systems, Inc.
Compiled Fri 29-Aug-14 22:22 by prod_rel_team
SFP Details:-
NAME: "TenGigabitEthernet1/1/3", DESCR: "SFP-10GBase-CX1"
PID: SFP-H10GB-CU5M , VID: V03 , SN: MOC1838AC0X
NAME: "TenGigabitEthernet2/1/3", DESCR: "SFP-10GBase-CX1"
PID: SFP-H10GB-CU5M , VID: V03 , SN: MOC1838AC3Q
02-15-2015 05:44 PM
Looks like DOM not supported.
http://www.cisco.com/c/en/us/td/docs/interfaces_modules/transceiver_modules/compatibility/matrix/DOM_matrix.html
02-15-2015 06:41 PM
may i know what should be workaround here? do i need to get a new SFP if yes then which one should do here? its 3850 switch need to have 10 gig uplinks.
or it got to do with IOS version?
Thakns!
02-15-2015 07:37 PM
I believe the model and SFP is supported. Now need to check :
1- IOS is good as you are running the latest one.
2- what is connected at the other end? Can you try doing the loop test between teh ports?
WS-C3850-24T | SFP-H10GB-CU1M7 | — | XE 3.2.0SE |
02-26-2019 10:36 AM
Can anyone provide an update to this link please:
I m trying to determine what sfps support the, show interface g1/1 transceiver detail, command
Thanks
Deena
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide