About wojciechlubas

wojciechlubas · 09-06-2021

Hi, As I upgraded from Fuji to Amsterdam on my ASR903, IOS XE, Netconf answers only with <error-info xmlns="urn:ietf:params:xml:ns:netconf:base:1.0" xmlns:nc="urn:ietf:params:xml:ns:netconf:base:1.0"><bad-element>filter</bad-element> on any request. ...

wojciechlubas · 07-01-2021

Hello, On my ASR907 IOSXE I need to deploy netconf, but I see different problems.If I activate netconf, router answer on any IP (public also). I tried to secure it by command:netconf ssh acl 80it does nothing... (of course called acls like numbered 8...

wojciechlubas · 01-11-2021

Hi everyone, I use netconf to perform some configuration actions. For security reason I prefer to keep netconf turned off by default and only activate for short time. Activation is no problem for me - I do it with ansible.But it would be much easier ...

wojciechlubas · 10-28-2020

Hello everyone, I would like to secure my router using Netconf with an access-list. Documentation says: netconf-yang ssh {{ipv4 | ipv6 }access-list name access-list-name} | port port-number} But on my router there is no such option: router#netconf-ya...

wojciechlubas · 03-26-2019

Hello everybody, On my ASR907 Router, with following software:Cisco IOS XE Software, Version 16.09.02Cisco IOS Software [Fuji], ASR900 Software (PPC_LINUX_IOSD-UNIVERSALK9_NPE-M), Version 16.9.2, RELEASE SOFTWARE (fc4) I can't achive remote L3 mirror...

wojciechlubas · 07-03-2018

I figured out, that this is only one possibility, so I am testing it right now and it works. Although there are other problems, because I want to separate announcements with communities that are comming from smaller routes and then aggregated, but th...

wojciechlubas · 07-03-2018

Cool... but I need it only per neighbor, not globally...

wojciechlubas · 07-03-2018

OK, so maybe in different way. How to aggregate single /32 routes into bigger subnets without loosing their communities?

wojciechlubas · 06-26-2018

I have tried to do the same, but since I want to announce for example separately 2 hosts from /30 network, I have to configure static routes, which will be with worse AD than connected one. Although it will be better match as long it is /32 instead o...

wojciechlubas · 01-11-2017

I have the same problem, but I am afraid, that this is impossible: http://www.cisco.com/c/en/us/td/docs/ios/mpls/configuration/guide/15_0s/mp_15_0s_book/mp_multi_vrf_vrf_lite.html Restrictions for MPLS Multi-VRF •Label distribution for a given VPN ...

Member Since	‎05-02-2014 12:40 AM
Date Last Visited	‎06-24-2022 12:06 AM
Posts	26
Total Helpful Votes Received	5

User Statistics

User Activity

Netconf under Amsterdam

Netconf security

How to deactivate netconf via netconf?

NETCONF access-list

ERSPAN at ASR90x

Re: IOS XR Route-policy. Changing route parameters basing on another route?

Re: IOS XR Route-policy. Changing route parameters basing on another route?

Re: IOS XR Route-policy. Changing route parameters basing on another route?

Re: You get get this /32s into

I have the same problem, but