Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Jabber on iPhone IOS registered as SIP phone on CME, outbound call fails.Link for configuration: https://supportforums.cisco.com/document/130876/cme-cisco-jabber-apple-iphoneNOTE:Even though we have g711ulaw configured under voice register pool for j...
This explains How Jabber Client(JC) Login works, Types of JC login and how to troubleshoot JC login issues. Jabber Client Login and Login Issues •Jabber Client Login•Two Types: -Automatic Login -Manual Login Flow that the Jabber client use...
two things:
try restarting "Web dialer service" on the node.
log a TAC case, there might be a chance that "ucmuser or ucmuser.war" might be missing from the tomcat/webapss dir.
Mikhail Kalita,
The "FIND" option is seen when there would be more number of configurations.
In your case, if you had configured more(~100) user ids in your cucm, you will see FIND option.
For example: we see 'FIND' opition below for DEVICE POOL in...
Configure below:dial-peer voice 200 voip incoming called-number . no vad dial-peer voice 300 voip ---->this is the dial-p towards CUCM session protocol sipv2 session target ipv4:192.168.50.10 ( CUCM IP address ) destination pattern 082287...
I dont see any matching outgoing dial-peer.dial-peer voice 100 voip incoming called-number .% no vad!dial-peer voice 200 voip destination-pattern 0822877730....... session protocol sipv2 session target ipv4:10.1.45.20 ( IP from Sip provid...
