Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi,
I have four Nexus 5548UP, two in a redundant FEX setup which then connect to the other two which also have redundant FEX's. These pairs are in separate vPC Clusters.
Both Nexus are slow to respond to pings and SSH is very slow on them. Performanc...
Hi
Im having a weird and wonderful time with Anyconnect 4.1.04011 and it detecting a Captive Portal which does not exist. I am connecting to an Cisco ASA 5510 which is on my FTTC broadband.
When I connect to it via my iPhone with Anyconnect mobile ...
Hi All,I have 2 3750-x's in a stack configuration. I have two servers which lost heartbeats with each other a few days a go Each server has each NIC going into one port of the stack.Gi1/0/9 and Gi2/0/9 which plugs into one of the servers has a large ...
Here are some pings from a server directly connected to a 5548.
To the switch its self:
#ping x.x.x.123PING x.x.x.123 (x.x.x.123) 56(84) bytes of data.64 bytes from x.x.x.123: icmp_seq=1 ttl=255 time=7389 ms64 bytes from x.x.x.123: icmp_seq=2 ttl=255...
Thanks for you reply.
I have checked the CPU and the pktmgr is very busy:
#show processes cpu sort
CPU utilization for five seconds: 60%/5%; one minute: 59%; five minutes: 59%PID Runtime(ms) Invoked uSecs 5Sec 1Min 5Min TTY Process--...
I had a feeling that an upgrade may help the situation and im currently going through change management to get this actioned.Would you not recommend running 15.x yet?
