Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
My report[1] tells you the experimental results of the performance of Cisco ClientLink supported on Cisco Aironet access points. You can remember the great performance of ClientLink forever.I have learned that new access points for IEEE802.11ax are C...
My report[1] tells you a simple viewpoint to understand the evolution of the wireless LAN from 1997 to the 2020s. You can also get basic knowledge on an uplink of Wi-Fi6, the latest IEEE 802.11ax standard. Data analysis results based on our experimen...
We had an experimental study in our indoor office environment to confirm the effect of enabled Probe Suppression in a Micro cell on a MACRO cell architecture of Cisco AP3802I in dual 5GHz band operations [1].
It was found that the enabled Probe Suppr...
Hi,I understand that the IEEE 802.11 standard only specifies the number of spatial streams and that the standard does not specify the number of physical antennas.
Hi,We can see Figure 5. Picture of the embedded antenna system and 3D antenna heat mapsin Cisco Aironet Series 2800/3800 Access Point Deployment Guide; <https://www.cisco.com/c/en/us/td/docs/wireless/controller/technotes/8-3/b_cisco_aironet_series_28...
Hi, Brian Taylor,Thank you for your comment!
The probe suppression supported by Cisco AP3802I and AP2802I is not a band select that uses 2.4GHz band or 5GHz band.
The probe suppression is used in dual 5GHz band operations.
Both a micro cell and a MAC...
