Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi,as you know cisco 3500 XL switches are L2 switches and there is no ios image which supports L3 functionality compiled for that devices, but what will happen if I'll try to run C3550-IPBASEK9-M image on 3500 XL series switch?Will it boot up?Will th...
Hi guys,look at this 268 87.00% DHCPD Database CPU utilization for five seconds: 22%/2% at 15w1dcore#showcore#show runcore#show running-config | inccore#show running-config | include dhcpip dhcp database flash:dhcp-bindings.txt write-delay 60 ti...
What is the best tool to manage 25 2960 switches, for example I create single user on each switch when needed, and many more similar task are solved similiarly.I need an advice what free tool can I use for that?
I have two devices connected to the same switch, S streams video using multicast, H doesn't send join request, but the multicast is being sent to H, actually it is being flooded. Both hosts are in the same vlan.Distribution-1#show ver | in WScisco WS...
I have two devices connected to the same switch, S streams video using multicast, H doesn't send join request, but the multicast is being sent to H, actually it is being flooded. Both hosts are in the same vlan.Distribution-1#show ver | in WScisco WS...
and one more thingthfith_1(config-if)#ip igmp ? filter set IGMP filter profile number max-groups set maximum number of IGMP groups that can be joined snooping IGMP snooping configuration
this may work, but I need igmp snooping to work as expected.I have ova 500 ports and assigning this acl to random subset of that interfaces is not the correct way to go.
