About jacob.fredriksson

jacob.fredriksson · 11-14-2022

Hello everyone, We are looking to refresh a smaller air-gapped routed network with the new Cisco Catalyst 8200L routing platform. This network will just use standard routing protocols without SD-WAN or similar technology, and will not traverse any ac...

jacob.fredriksson · 07-04-2022

Hello everyone! I have been going through some documentation for IBNS 2.0 templates and have some questions regarding 802.1x retries and timeout. When using IBNS 2.0, you can set the 802.1x number of retries and retry-time between attempts direct...

jacob.fredriksson · 08-22-2019

Hey everyone, I ran into a weird issue yesterday on a ISE 2.4 patch 8 deployment in which ISE is (for some reason) trying to authenticate a domain computer (which is using EAP-TLS) as a domain user. The computers are configured to only use machine au...

jacob.fredriksson · 09-26-2018

Hi everyone! We have 2 x Catalyst 6807 switches in a Quad-Supervisor VSS setup in which one 10 Gigabit link from each supervisor make current VSL-link between the switches. So in total we have 20 Gbit between the two switches. The Sup6T supervisors...

jacob.fredriksson · 07-13-2018

Hello everyone, I am trying to add a FPR2120-ASA-K9 to Prime Infrastructure but it tells me the model is not supported ("Unsupported Cisco Device"). I am running Prime 3.1.7 with device pack 16 installed. I haven't been able to find any of the new ...

jacob.fredriksson · 09-01-2022

I realizes this thread is a few months old, but I am in a similar situation about upgrading ISE 2.4 to ISE 3.1 Is the Backup & Restore method really supported for this big jump in versions? I've seen multiple threads on this forum and other places th...

jacob.fredriksson · 07-04-2022

Thank you for your comments, Arne! In my usual template for IBNS 2.0 switch configuration I haven't included the "retries 2 retry-time 0" parameters (yet), but I've been seeing more and more documentation and examples using these parameters, which ...

jacob.fredriksson · 08-25-2019

Thank you Arne for taking a look at this.I've been doing lookups from inside ISE on several machines that work and comparing them to the non-working one and unfortunately I haven't been able to find anything that looks out of order. The computers' us...

jacob.fredriksson · 04-09-2019

We are on ISE 2.2 and using the client provisioning package called MacOsXSPWizard 2.3.0.43 and it is working for us for Mojave Macbooks.Make sure to update Cisco profiling feed under Work Centers > Profiler > Feeds. Press Test Feed Service and then r...

jacob.fredriksson · 03-08-2019

Hello Oliver!Which AnyConnect version fixed the issue for you? We are also experiencing this problem.

Member Since	‎06-10-2014 05:27 AM
Date Last Visited	‎10-08-2024 03:50 AM
Posts	57
Total Helpful Votes Received	78

User Statistics

User Activity

Catalyst 8200L Router MACSec Support - clarification needed

IBNS 2.0 Policy Map Retries/Retry-time vs Interface configuration?

ISE 2.4 tries to authenticate domain computer as a domain user

Upgrade 6807 Quad-Sup6T VSS from 10Gbit to 40Gbit - how?

Add FPR2120-ASA-K9 to Prime Infrastructure?

Re: Cisco ISE 2.4 to 3.1 Migration, including Change of IP due to DC m

Re: IBNS 2.0 Policy Map Retries/Retry-time vs Interface configuration?

Re: ISE 2.4 tries to authenticate domain computer as a domain user

Re: ISE 2.1 BYOD Support for MAC 10.14 Mojave

Re: AnyConnect reconnects with Hyper-V Adapter