Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello.
I have a C40 endpoint I'm looking to get registered in CUCM. C40 is running version 6.0 and the correct proxy is set. The log files show the following
Sep 16 17:32:21 ppc appl: 795.74 PROV I: void CUCMProvision::CUCMProvisionUser::report(b...
I am deploying Jabber Guest 10.6.7 to a UCS-C220 M3 running ESXi 5.1 During the ova deployment, I am not prompted to enter an IP address or any network information...Has anyone ran into this issue? Thanks in advance! Attached is a screenshot. Right a...
Has anyone come across this error in vTS Conductor? I am using TCP from Conductor ---> vTS in the lab for testing. TelePresence Server's license capacity exceeded: An individual TelePresence Server's license resource is insufficient to create a confe...
Has anyone had issues with using a self-signed certificate for VPN phones? After following this guide to a "T" I'm getting a certificate validation failure when I access the group-url I am using. Just to be clear, the phone has already registered to...
You will also need a BOT device in CUCM. This is essentially just creating another phone that gets tied to the end user. iPhones are TCT, Android is BOT. I've posted the guide below on what you'll need, but its pretty straight forward. Search for "BO...
Check out my blog post. This walks you through step-by-step. http://blog.cloverhound.com/2015/09/03/cisco-expressway-the-first-step-towards-a-vpn-less-enterprise-part-2/
This has been resolved. Turns out..another guy I work with setup the Expressway-C for use with Microsoft Lync B2BUA to test with. I overlooked it on the initial config. This was causing all sorts of SIP signaling issues. Turned that off and we're in ...
