Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hey everyone, I just deployed a 9130AXI and the AP is running with 2.4Ghz, 5Ghz, and 5Ghz mode instead of the 2.4 and single 5Ghz 8x8. I wanted to try running in this mode as I think my environment will benefit more with this setup. As I observe the...
I am having the same issues and have been for a few months. It is really a pain. I am getting the error: The attempt to connect to the Cisco Licensing Server failed. The server might be busy or unavailable. Try again later.
Hope this gets fixed. Su...
Thanks so much. I responded to TAC with what you are seeing as well and he shared with me the admin guide that generally speaks of TCP 12001 needing to be open. I can't find that it talks about on both nodes. Can anyone else confirm that Port 12001 T...
Yes this is how mine is. It appears to me that 12001 should only be enabled on the primary. How did you reset the M&T database? I am thinking this is my issue as well.
Thanks so much
Yes, this sounds very similar to what I am seeing. Thanks for the information. TAC is wanting to reset the ISE application after de-registering and then re-join it to the deployment. One thing I really would like to know is if you can see TCP port 12...
