Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello From last couple of days I'm struggling how to set up priority queue on Cisco Catalyst WS-C6503-E with Transmit queues 1p3q8t.I have line card on slot number 3 WS-X6748-GE-TX interface GigabitEthernet 3/44.My main target is priority egress (out...
Hello I have ACS version 5.5.0.46 I wan to schedule some backups, but ... 6 [28164]:[info] transfer: cars_xfer.c[333] [admin]: sftp copy out of /var/tmp/ADElogs.tar.gz requested6 [28164]:[info] transfer: cars_xfer_util.c[581] [admin]: resolved server...
HelloI have two VMs based on VMware and some VLAN configuration VM1 - VLAN 130 on ESXi01VM2 - VLAN 135 on ESXi02 Per exemple, a machine from the ESX1 vlan 130 can't ping an another VM in the ESX2 vlan 130. But if I move the second VM to the ESX1, it'...
Hi Short question. I have below topology with hardware on board: WS-C2960X-24TD-L 15.0(2)EX4 C2960X-UNIVERSALK9-MQuestion:What solution will be the best STACK or HSRP ? At the moment issue is that, when one 3rd router will go down, ther...
Hello Richard, 3rd party routers are managed by them, i dont have access, i cant manage it.On mentioned routers there are no any clustering mode, redundacy such as HSRP between only two routers.One router is from ISP1 and second one is from ISP2 so t...
FABRIC-001-B# show service-profile circuit server 1/5Service Profile: newDC1Server: 1/5 Fabric ID: A Path ID: 1 VIF vNIC Link State Oper State Prot State Prot Role Admin Pin Oper Pin Transport -----...
some outputs FABRIC-001-A(nxos)#(nxos)# show interface vethernet 930Vethernet930 is down (nonParticipating) Bound Interface is -- Port description is server 1/5, VNIC vNIC0 Hardware is Virtual, address is 002a.6a81.77a0 Port mode is trun...
