About Rmei Mrozek

Rmei Mrozek · 06-24-2014

Hi,I have a problem with WAP551 and 2 SSID.SSID Enterprise = VLAN 1SSID Visitor = VLAN 110Enterprise's network sets with an unique network and visitor's network sets with an other network.I'm sure about my configuration because when I set the SSID en...

Rmei Mrozek · 07-04-2014

Hi chrebert,Thank you for your answer !I already unchecked the Untagged VLAN option in AP's configuration.When I set VLAN 1 as untagged and VLAN 110 as tagged, my guest's SSID doesn't work.With General Mode, VLAN 1 and 110 work on the same link. Inde...

Rmei Mrozek · 07-01-2014

mpyhala,It works !I must modify knew parameters in switch's configuration.First, I set in Setting Interface port 5 and 29 (AP's port) in General mode.Second, I set in Port VLAN Membership port 5 and 29 (AP's port) 1T / 110T.Third, I don't modify port...

Rmei Mrozek · 07-01-2014

I must modify knew parameters in switch's configuration.First, I set in Setting Interface port 5 and 29 (AP's port) in General mode.Second, I set in Port VLAN Membership port 5 and 29 (AP's port) 1T / 110T.Third, I don't modify port 48 (WAN's port) -...

Rmei Mrozek · 06-30-2014

Hi,Could you see my switch's configuration please ?Thank you so much !

Rmei Mrozek · 06-30-2014

Hi mpyhala,Thank you for your answer.There is only switch between AP and router. Moreover, when I only set visitor's SSID with VLAN 110 on WAP551, the WIFI work. So, the router supports VLAns.When I set a port with (untagged) VLAN 110 and I connect m...

Member Since	‎06-24-2014 12:13 AM
Date Last Visited	‎08-18-2017 04:01 AM
Posts	8

User Statistics

User Activity

VAP1 no internet access

Hi chrebert,Thank you for

mpyhala,It's work !I must

I must modify knew parameters

Hi,Can you see my switch's

Hi mpyhala,Thank you for your