Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Cisco 1941-sec-k9, with EHWIC-D-8ESG.running-config as follow:Current configuration : 4866 bytes!! Last configuration change at 02:24:32 UTC Sun Jul 6 2014 by miaozhixuversion 15.2service timestamps debug datetime msecservice timestamps log datetime ...
Platform Cisco 1941, Interface Card EHWIC-D-8ESGint vlan 2ip address 192.168.2.1 255.255.255.0no shutAfter these commands issued, I immediately configure the interface on EHWIC-D-8ESG,using the following commands.int G 0/1/0switchport access vlan 2Bu...
I wanna try to build a more secure LAN. I want every client (wired/wireless) to connect the network used a certificate not a user/password pair.But now, as i am a newbie, I don't know what to choose between TACACS+ and RADIUS. Because I have a Mac mi...
As i am a newbie, i read the BBA configuration guide, and try some commands in this guide.When i enter the "interface atm 0" command in global configure mode, it said "Invalid input detacted at '^' marker.Hm, the router is 1941 without adsl wic, is t...
Yeah, it works. Thanks! And I found that "Configuring Network Address Translation: Getting Started" helpful. DHCP, yes, next step is configuring DHCP on Gig0/1 VLAN102 VLAN 103.
