First, i have read this doc: https://www.cisco.com/c/en/us/td/docs/ios-xml/ios/isg/configuration/xe-3s/isg-xe-3s-book/isg-ipv6.pdf
Here is simple config:
ip subscriber list slist
ipv6 prefix default 48
!
interface SomeInterface0/0.123
ipv6 addre...
Hello.
Here is interface config:
interface TenGigabitEthernet0/1/0.199 encapsulation dot1Q 199 ip address 100.65.0.1 255.255.0.0 ip nat inside ipv6 address ISP 0:0:0:199::/64 eui-64 ipv6 enable service-policy type control Captive ip subscriber l2-con...
Hello. I have IPoE customers, with IPoE sessions configured like this:
policy-map type control IPoE
class type control CM_C_IPoE_RTIMEOUT_REAUTH event timed-policy-expiry 1 service disconnect
!
class type control CM_C_IPoE_REJECT_REAUTH event tim...
Hi.
Got the problem with SCE 8000
It reboots every 7 hours approx.
Any ideas?
Here is what i've found in dbglog.txt:
12/19/15 09:11:42 [000000023137:280:676] | 000 | 0000054504 | 0000000 | <<ERROR>> [0x0a10:0x0002] System Message: Standard output/e...
(config)#vpdn logging ? accounting Send VPDN log to AAA accounting cause Cause of termination local Log VPDN events locally remote Log VPDN events to a remote tunnel endpoint tunnel-drop Log VPDN tunnel drops user Log VPDN user events <cr>
Why, oh why, RAID degradation is not shown in SNMP table cucsStorageLocalLunTable ?And there is also no cucsEquipmentIndicatorLedTable on UCS 220M3S, CIMC v 2.0(1b).I have to reinvent a wheel, to monitor this thing in zabbix.