Hi All
Can anyone provide me an example of extending vlan over VPLS using ios-xe. i am more interested about the CE config as the PE config is well demonstrated on the below link:
http://www.cisco.com/c/en/us/td/docs/ios-xml/ios/mp_l2_vpns/configura...
Hi All
I am working on lab on ios-xr and I am using VIRL. I have configured a QoS policy as per below:
class-map match-any MPLS_EXPERIMENTAL_4 match mpls experimental topmost 4 end-class-map!
policy-map OUT_TO_CE class MPLS_EXPERIMENTAL_4 bandwidth...
Hi AllI am new to EEM scripting and would like some help. Please refer to the attached diagram and the scenario below : CPE has 2 up links as shown on the diagram connecting to the ME3400 (layer 2 path) devices on each link and then the 3400s connect...
Hi All
I have a problem with the following setup:
I am running ospf as IGP and mpls is enabled in the core. PE1 is regular ios and PE2 is ios-xr.
CE ----- PE1----MPLS CORE----PE2-----CE
I have a layer 2 vpn setup between my PEs and it shows that i...
Hi, I have since learned L2VPN circuit between IOS PE and IOS-XRv PE will show that it is up but will not pass traffic due to a limitation on XRv, hence it is working fine among IOS devices.
Check these links below to understand what features are ...
