About alan-zhan

alan-zhan · 06-19-2016

Hello, I have a question about S2S IPSec. [[{"type":"media","fid":"1311346","view_mode":"default","link_text":null,"attributes":{"alt":"Topology","title":"Topology","height":"383","width":"488","class":"image-style-none media-element file-default"}}]...

alan-zhan · 03-19-2016

Hi, I want to ask that I have two site which have telephony services. At the Extension 1, when I press number 1000, it shows the message "To 1" and "Busy". At the Extension 1000, when I press number 1, it shows "Unknown number". So how can I configu...

alan-zhan · 07-21-2014

I have a question about HSRP porotocolI had setup a HSRP for Gateway Redundancy and BO_GW1 is the default active router.The route goes to OUTSIDE Router is from BO_GW1 in the normal state.But sometimes the route from outside come back to the internal...

alan-zhan · 03-20-2016

Hi, Jonathan. Thank you for your explanation! But are there any ways to do it without changing extension? For example, configure the voice translation-rule or something else.

alan-zhan · 03-19-2016

I add the incoming called-number . under the dial peers, but the problem still exist. This is the configuration related to VoIP (Extension 1 Side) interface Tunnel0 ip address 10.0.0.1 255.255.0.0 no ip redirects!interface GigabitEthernet0/0 ip addre...

alan-zhan · 07-21-2014

Thank you for your reply.But can I try the IP SLA configuration on the Packet Tracer?

Member Since	‎07-21-2014 05:12 PM
Date Last Visited	‎08-15-2018 02:19 AM
Posts	6

User Statistics

User Activity

Site to Site IPsec without re-establish a new tunnel

VoIP Dial Peer Destination Pattern

Next hop Priority of HSRP

Hi, Jonathan.

I add the incoming called

Thank you for your reply.But