Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi,Anybody know if its possible to have "login" and "network" users authenticating against 2 different Radius servers on a router? i.e. Sys admins auth against radius server 1 for logging in and ppp/network users auth against radius server 2. How is ...
Hi,Have recently upgraded a pair of PIX 525s to 6.3(3)running in stateful failover and wish to load PDM on them. Queries I have:1)As they are in production enviroment, do you have to reload the PIXes for PDM to work? 2) Is there a recommended method ...
Hi,As the other posts indicatedshow run | i propagate-ttlThere are 2 options for dis-abling the ttl forwarded and local where forwarded option allows the propagation of packets originated by the local device.RegardsNoel
Sounds like a hardware issue. Do you have the console cable connected when you power it up? If you do and still don't get any response on the terminal window, I'd say it is a hardware issue especially of it was working fine previously.
The PIX allows you to enter more than one peer address within the crypto map entry which allows for backup. Routing is a bit trickier. Maybe try and subnet the route you have with more specific masks for your live link and a less specific mask for yo...
Thanks for response. In process of migrating from an old IP addressing scheme to a new private scheme on a DMZ interface hanging off the PIX. In order to allow the migration of the various hosts over time I was hoping to provision secondary addressin...
