Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I have a scenario where I have two WLC-5508 in production that are currently not part of a mobility group. I just wanted to know if there is any downtime if I set up a mobility group between the two controllers? My gut feeling tells me that the curre...
Got an interesting scenario. I am labbing out 802.1X authentication for wireless with a Cisco 2504 WLC along with a Windows Server 2012 r2 with AD, DHCP Server, DNS Server, Certificate Services, and NPS. I was able to make the different parts communi...
On my Cisco WLC 5500 series > Monitoring > Clients, I see a bunch of clients connected as 802.11g and 802.11bn. I understand that 802.11g and 802.11b is 2.54Ghz band while 802.11n is 5.0Ghz, but what exactly does it mean when it tells me the client ...
Here is my current topology: ISP Modem --------------------(fa0/0) R1 fa(0/1)-----------------S1-----------------------(fa0/0) R2 (fa 0/1)---------------S2 11.22.33.44 172.16.0.1 172.16.0.2 ...
Thank you for the fast response. One last thing. I know that Cisco's Client Load Balancing during association time requires the device to have CCX compatibility in order for the controller to decide which AP it should connect to. Is this the same cas...
I've included a snapshot of my radio policy under WLAN > (my SSID) > GeneralI have devices that are definitely 5Ghz ready. Is the reason why none of my devices are connecting to 5Ghz due to this being set to 802.11b/g only? Should I change it to "Al...
Ahhhh, as I was pasting the router configurations, I noticed my ACL's and NAT overload configs were not there anymore! I must have not saved the configs from the day before! Thanks for troubleshooting this with me.
