About cwhite0013

cwhite0013 · 02-03-2015

Hello,I have a questions about the auto-recovery. The 240 second time seems like quite a long time to wait to bring the ports back online however the scenarios that I am reading sound like it would be pretty rare. My question is about the one scenari...

cwhite0013 · 10-03-2016

Ah yea, there's your issue. The default route on your server is pointing out of wlan2 and you don't have a route for the 10.0.0.0/24 network. This means that right now traffic destined to the 10.0.0.0/24 is being sent out your wlan2 interface rather...

cwhite0013 · 10-01-2016

You'd just configure the Nexus side as a trunk (switchport mode trunk).

cwhite0013 · 10-01-2016

So, it sounds like the only layer 2 connection between switches is the port-channel between nexus-1 and nexus-2. Spanning-tree is only going to be active on the virtual port-channel interface and won't block any ports since there is no loop. So, tech...

cwhite0013 · 10-01-2016

If you're using the built in Windows VPN software, it will not work. "unknown DH group 20" makes me think you're using L2TP in the Windows VPN software but Cisco only supports IPSec. The old Cisco VPN Client does not work on Windows 10 but there are ...

cwhite0013 · 10-01-2016

What type of packet headers are you looking for? The packet header of every single packet that comes in? NetFlow exports flows and not every single packet. If you want to look at every packet rather than the flows, you can create a span port to the s...

Member Since	‎09-14-2014 01:09 PM
Date Last Visited	‎08-18-2017 04:02 AM
Posts	37
Total Helpful Votes Received	10

User Statistics

User Activity

vPC Autorecovery

Ah yea, there's your issue.

You'd just configure the

So, it sounds like the only

If you're using the built in

What type of packet headers