Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Prime 3.1.5I'm trying to develop a way to see which sites/locations within Prime have got critical alarms using the REST API.I want to use this to understand which sites have got access points offline (for reporting purposes). Access points that are ...
We have some of the new Cisco 1810W access points. We're trying to set them up with the following configuration but having difficulties:
AP tunnels Wi-Fi traffic to the controller for central switching at the controller.Wired ports on the underside ...
We have a large wireless network, 3000 access points (Aironet 3602 and 3702) across 8 x WiSM2 controllers running 8.0.110.0 code.
I've noticed recently that most of our 5 GHz radios are being allocated to channels 36, 40, 44 or 48 by Dynamic Channel ...
I'm currently testing out DHCP Snooping.I've set up a lab environment consisting of a standalone Catalyst 3750X 15.0(2)SE7 switch uplinked to a Catalyst 3560 15.0(2)SE7 switch that has my legitimate DHCP server plugged into it. I've made the uplink i...
I am considering doing the same for a building that has a high density requirement, but that also has a lot of glass partitions and floor/ceiling voids.
The building has not been constructed yet, but some desktop planning surveys show that the standa...
Thanks for your reply.This makes sense, although I do not know why it should be designed that way. We only use Prime for wireless management and monitoring and don't use it for any other type of device other than controllers and access points. We wil...
We had a similar issue but it was on Prime 2.x
We had to engage Cisco TAC because there was a problem with the event and alarm tables.
Events in Prime trigger the Alarms and one of the tables had reached a soft limit which meant that the Alarms were ...
Having spoken to our Cisco representative on this, we've been told that the issue 'should' be resolved in code versions from 8.5 and upwards.
The workaround given to us is to tunnel all LAN traffic up to the controller, to be routed at the network su...
The issue is due to bug CSCva41204. Currently categorised as "enhancement".
CSCva41204
Tagged Management VLAN Option Broken for 1800/3800
Symptom:"VLAN Tagging" for 2800/3800 in advanced settings does not work as for IOS APConditions:AP 1800/3800Wor...
