cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
682
Views
5
Helpful
2
Replies
Highlighted

CISCO PRIME INFRASTRUCTURE 3.1 - ALARM SUMMARY NOT SHOWING ALARMAS

Hi:

Alarm summary is not displaying alarm count that are visible with "VIEW DETAILS"

Some help or comments?

1 ACCEPTED SOLUTION

Accepted Solutions
Highlighted
Beginner

We had a similar issue but it was on Prime 2.x

We had to engage Cisco TAC because there was a problem with the event and alarm tables.

Events in Prime trigger the Alarms and one of the tables had reached a soft limit which meant that the Alarms were not being generated.

The Cisco TAC engineer had to manually modify the soft limit of the table within the Oracle database so that it would allow the Alarms to be generated.

Darren.

View solution in original post

2 REPLIES 2
Highlighted
Beginner

We had a similar issue but it was on Prime 2.x

We had to engage Cisco TAC because there was a problem with the event and alarm tables.

Events in Prime trigger the Alarms and one of the tables had reached a soft limit which meant that the Alarms were not being generated.

The Cisco TAC engineer had to manually modify the soft limit of the table within the Oracle database so that it would allow the Alarms to be generated.

Darren.

View solution in original post

Highlighted

Excellent, Darren.

Thanks a lot!

Julio

Content for Community-Ad