You haven't provided enough information to fully debug this.You will have to provide the followingMPLS forwarding-table for each node'sh ip cef' - Do this for PEs managing the L2Transport'sh ip ro' I think you have to configure a targeted LDP neighb...

Sounds like it could be a duplicate IP assignment or an ARP problem.You really need to provide more information. Given the information the problem could be caused by L2 or L3 issues so you need to provide more info to narrow it down. What type of swi...

Take a look at this MIBCiscoPoePdMIBOID:1.3.6.1.4.1.9.9.414This should explain morehttp://tools.cisco.com/Support/SNMP/do/BrowseMIB.do?local=en&step=2&mibName=CISCO-POE-PD-MIB

I would say you need to use VRF-lite in order to do this efficiently.All other solutions will require tunnelling which is not efficient.One possibility is to have a single site that has the routes to the Internet i.e. a central DC site. This would me...

The Hybridge process is responsible for flooding when there's no entry in the MAC forwarding table as well as broadcasts & multicasts.This URL explains a lot but the CPU is really spending loads of time in interrupt service routines due to transit tr...