Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi,
I have an OPSF 200 process running. Under this I have configured a Distribute list which is referencing a prefix list to filter routes.
I have a requirement of modifying that prefix list. Please let me know if that will require restarting the OS...
Hi, I have set up a Remote access VPN from Home to Cisco ASA 5512-X.I am able to connect successfully and even getting a valid IP address from VPN pool 172.21.3.1-. However I am unable to access any of the internal resources.Internal Network: 172.20....
Hi, I am trying to set up Wireless on a C897.But the Dot11radio 0 interface isnt coming up.Its giving an error stating "Mar 1 05:08:26.014: %DOT11-4-NO_SSID_VLAN: No SSID with VLAN configured. Dot11Radio0 not started."PFA the configs of both the rout...
Hi All, I am trying to bring up Wireless on C897.I have done the below config in the Ap dot11 SSid testvlan 1 interface dot11radio 0ssid testno shut but its giving an error stating "*Mar 1 05:08:26.014: %DOT11-4-NO_SSID_VLAN: No SSID with VLAN confi...
Hi Nitish, Thanks for the reply.I will try this out and let you know.I had one more issue. When connected to the VPN my internet goes for a toss.I didnt enabled split tunneling while creating the VPN.I am using a Windows VPn client to connect to VPN....
Hi Steve, Thanks for an early response.I tried adding the authentication open but its still giving the same error. I am attaching herewith the AP and router config.Please if you can check and let me know where I am going wrong
