About pavlosd

pavlosd · 01-24-2013

Hi all, We have a Cisco 7600 Router with SUP720/MFSC3 that was running version 12.3(33)-SRC3 for more than 2 years now. We recently had to upgrade to a newer release to solve a bug issue after recommendations, so we chose to go to SRD8 release.Since ...

pavlosd · 06-11-2012

Hi All,We have a wifi network for guests, that we route to internet through an old PIX515 Firewall. We recently tuned the timers to lower values in order to "save" on resources and publix address usage.The timers we use are:timeout xlate 0:30:00timeo...

pavlosd · 02-17-2011

We have this new project requirement to tranfer a mirror traffic from a Location A to Location B. At location A we have a switch 3750. At location B a probe is installed (similar to wireshark). The two locations are connected suing IP/MPLS network ro...

pavlosd · 02-07-2011

We have 2 trunk ports connected to 2 different Servers Additionally we have a couple of clients that belong to each LAN (access port). Assume Server 1 belongs to VLAN 12 and the Second Server to VLAN 13.We have a new requirement that suggests both s...

pavlosd · 02-03-2011

We have recently got the new version of ACS 5.0 and we tried to upgrade and migrate the configuration and database from a solaris to a linux platform (for performance reasons only). We followed the proceedure of backup/restore described below.http://...

pavlosd · 03-03-2011

In case someone is interested, I found an alternative to do the migration between different OS, using the mcdadmin command. Although as Cisco says it shouldn't be used unless "guided" by the support.To exportmcdadmin -e carconfig.txt To importmcdadmi...

pavlosd · 02-28-2011

RSPAN is what we had in mind testing. Thanks.

pavlosd · 02-09-2011

Naidu,What is the link for VLAN Bridging?Additionally can you brdidge 2 VLANs using crossover cable on the same switch between 2 access ports?Regards.

pavlosd · 11-01-2010

I was hoping for an actual example, not a documentation example.Another thing is that the reason i couldn't get the qos to work in 3750 is that I found out through other forums that the command"show policy-map interface" is not working (BUG???) and s...

pavlosd · 10-15-2010

Great... Thanks for the answer. You are right.The problem was caused by a nat statement, we had to "tune" it using access-list (nat x access-list name) instead of a network command (nat x network subnet mask).

Member Since	‎01-13-2003 02:55 AM
Date Last Visited	‎08-18-2017 03:54 AM
Posts	323
Total Helpful Votes Received	33

User Statistics

User Activity

BGP Flapping after upgrading 7600-SUP720 to 12.2(33)SRD8

Xlate Timeouts

transport mirroring traffic from one site to a remote probe

Bridge 2 Vlans in a Catalyst 3750 Switch

Error while migration Access Registrar 5.0 from Solaris to Linux

Re: Error while migration Access Registrar 5.0 from Solaris to L

Re: transport mirroring traffic from one site to a remote probe

Re: Bridge 2 Vlans in a Catalyst 3750 Switch

Re: QoS marking on vlan - cat3750

Re: Disabling nat-control on a "live" firewall