Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello,The issue that you are facing is related to the fact that the SPA112 doesn't have this IP address. It is set by default to use a DHCP server on the Internet port. If you don't have a DHCP server in your network you can use the IVR codes to set ...
Hi once again The information provided to you comes from my own experience with the AP's. In some environments they can reach also 70 meters of range, but this coverage really depends a lot on the surroundings. As I previously said 30-50 meters is t...
Hello,The distance that the products mentioned can cover is between 30-50 meters (but it always depends on the environment in which the AP is installed). Usually you should be able to reach the 50 meters without issues. Unfortunately there is no offi...
Hello,In order to better understand the problem we would need some further information regarding your topology, configuration file and IP addressing scheme, also the default gateway of the clients in your LAN. The best approach in your case will be t...
Hello,From what I understand you have done a factory reset of the phone and now you want to configure it from scratch. Once the phone has received an IP address, just type the address in a browser and then the web gui will appear. From there on the r...
