Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi Experts, I've a strange issue and any help is appreciated.I've used three AS5400 in different ways:- H.323 gateway- SIP gateway- MGCP gateway controlled by PGW (current scenario)I've loaded different IOS during years but in all these environments ...
Hi Experts, I'm searching for a way to disable only 193 NSE event on AS5400 (this is the event to handle echo cancellation).My goal is send only 192 NSE message from my AS. Is there a NextPort Voice register to accomplish it? Can I use a voicecap ent...
We have about 5000 devices (SPA2102, WRP400, SPA8000, SRP521 and SRP521-U). Fax transmissions are generally OK but there is a little percentage of failed fax.Tipically faxes are handled via Cisco NSE 192 events. We studied many traces and we observed...
Hi Experts, we have an issue with SRP521 and FAX.We have change a SPA2102 from customer location with a new SRP521.Before the change of CPE, the customer doesn't had any problems during fax. After the change we encountered an issue in both directions...
We have replaced an old Cisco ATA188 SIP with a new SPA2102.After this substitution we encountered a Caller ID problem.The analog phone connected to SPA doesn't show the CID any more.We have tried every possible combinations available on the SPA with...
We have some news:- after many years I've changed the TDM provider without fix the problem- the problem regards about 2% of both incoming and outgoing calls, so it is indipendent from direction of the call- the audio issue is always in the call leg f...
We have some news:- after many years I've changed the TDM provider without fix the problem- the problem regards about 2% of both incoming and outgoing calls, so it is indipendent from direction of the call- the audio issue is always in the call leg f...
Hi Cisco, I need some informations about WRP400 Freezing problem.First of all, the auto reboot feature of voice module introduced in 2.00.30 firmware has partially fixed the issue but I've still many devices with same problem.In addition, this fea...
Hi Cisco, I need some informations about WRP400 Freezing problem.First of all, the auto reboot feature of voice module introduced in 2.00.30 firmware has partially fixed the issue but I've still many devices with same problem.In addition, this fea...
Thank you for the quick answer.The FAX Disable ECAN = YES is the same option triggered by NSE event 193.My FAX transmissions work very well only with FAX Disable ECAN = NO, so I want ignore NSE event 193.Can you ask to developers if I can filter NSE ...
