About lance.elmshaeuser

lance.elmshaeuser · 06-19-2009

Background. 4 switch 3750 stack. Switch #4 is the master.We have the following QoS cos-maps setup on our switch.mls qos srr-queue output cos-map queue 2 threshold 1 2 3 4 6 7mls qos srr-queue output cos-map queue 2 threshold 3 1mls qos srr-queue ...

lance.elmshaeuser · 06-18-2009

I have a 2 switch, 3750 stack. Switch 1 is the master. I have QOS enabled. When I enter the following command:show platform port-asic stats drop fastEthernet 1/0/1it works, but if I enter the commandshow platform port-asic stats drop fastEthernet ...

lance.elmshaeuser · 04-30-2014

I think right now what I want is for the tablet and phone AnyConnect client to behave like the laptop and desktop AnyConnect client. I.E. don't try to auto reconnect when the primary fails, inform the user that they need to attempt to reconnect, up...

lance.elmshaeuser · 04-29-2014

We are running 9.1.4 and this is our experience. In the AnyConnect Client Profile section we have set our backup server list and have turned "Auto Reconnect" off. When NOT connected and the primary fails.AnyConnect for laptops and desktop tries the ...

lance.elmshaeuser · 03-24-2014

We are having the same issue. Did you ever get this worked out? Here is an excerpt from the CCNP Security VPN book that supports what we want it to do."In addition to trying one of the configured backup servers if the primary ASA is unavailable whe...

lance.elmshaeuser · 08-26-2009

We were are doing a similar style of marking. We had to enter the command "mls qos cos 5" and "mls qos override". Then on the router port we had to set "mls qos trust cos". Hope this helps.Lance E.

lance.elmshaeuser · 06-19-2009

True, true on the cos-map breakdown. Anything with a COS of 2,3,4,6,and 7, should also be dropped at threshold 1 in queueu 2 and anything with COS of 1 should be dropped at threshold 3 in queue 2.We don't have a cos-map for COS 5. Maybe this is the...

Member Since	‎06-18-2009 06:59 AM
Date Last Visited	‎06-18-2019 09:33 AM
Posts	9

User Statistics

User Activity

Packets with COS tags espaping our COS maps

show platform port-asic stat drop on non-master switch

I think right now what I want

We are running 9.1.4 and this

We are having the same issue.

Re: Question about qos on L2 switch

Re: Packets with COS tags espaping our COS maps