Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi,
I need some help debugging this issue.
After WLC5520 upgrade from 8.10.162.0 to 8.10.196.0, some client can not access to wireless network.
( AP C9115AXI-T )
The situation is as follows:
(1) The client can get IP from DHCP server, but can not pin...
Hi,
There are many log as below on C3850.
%IOSXE-7-PLATFORM: 1 process platform_mgr: wthreadpool_handle_failure: Unresponsive thread tp = 0x55416218, idx = 0, pthread = 0x31c62490
and the CPU is high.
Core 0: CPU utilization for five seconds: 92%; o...
Hi,I have a BGP topology as below. (please see attachment more detail)<1> R1 is BGP AS65011 and R2 is BGP AS65012<2> There are two links between R1 and R2 , one is MPLS ,another is FTTB. Both links establish BGP.<3> These two links are not loa...
Hi Yesterday our core 6513(Version 12.2(17b)SXA) crashed Dec 10 16:11:52.696: %C6K_PLATFORM-SP-2-PEER_RESET: SP is being reset by the RP%Software-forced reloadCrashinfo is attached. Hope to get you expert opinion on this.
