Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Customer has ISE integrated with MDM. He understands that he needs Apex licenses for that. He also wants to do profiling of those endpoints but he wants MDM to do the profiling and pass the information to ISE. In that scenario does he need Plus licen...
Hi,Is there a way to dynamically set the QOS per user on a Cisco switch? Dynamically assigning a VLAN and inheriting QOS settings from the VLAN is not aceptable. In my scenario it must be related to the user´s traffic or to the port where the user co...
Hi Alberto,Files you mention are correct. For the phone you need it running 9.2.1 version. I am almost sure CUCM 8.6.1 already contains the incumbent files for it. You can double chekc that your tftp server in CUCM contains file SIP75.9-2-1S.loads. U...
Hi Lai,Your CTS logs indicate that you are conifiguring TSPM-1.8.1-P1-1S as the load name for your codec. This is not correct, (you should leave CTS.1-8-1-34R-K9.P1 in there). This is also suggesting that you might be not following exactly the proced...
Hi Ben,As you can see on your output, your phone is still running the old MIDlets.I guess there are many possible reasons for it to happen, but I would say a frequent one is that people update the existing service instead of creating a new one in CUC...
Hi Ben,Can you post the output of the "show version" command on the codec? and also these two lines taken from the "show hardware all" on your codec too?Phone midlet status : activePhone midlet version : TSPM-1.8.1-P1-1ST...
Hi,This link contains intructions for configuring and troubleshooting TelePresence security.http://www.cisco.com/en/US/docs/telepresence/security_solutions/CTSS.pdfChapter 6 focuses on CTS security. Most of the configurations described in there must...
