Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Looking to design a voice over WLAN network and did not know where to start, check out this 20 minute video which takes you through the process. You can use this video along with the 7921/7925 deployment guide to setup a VoWLAN network.
In this session , we go over some basics of troubleshooting client connection issues on a cisco wireless controller. For additional details on client debugs visit the following link http://www.cisco.com/en/US/products/hw/wireless/ps430/products_tech_...
What's the controller code. What's does the show msglog look like. You might be sending a cckm reassociation request that is invalid.Finally there should be sufficient coverage to enable seamless roaming...Run Debug cckm detailed enable along with De...
{making a change as per Wesley's comment. He is right No you will need to reboot after installing the ER fille. Dont install both files at the same time. You can install the .aes file first on both the controller and then use the swap comman...
your fastest ticket to the solution is to first identify why the client is stuck in dot1x . If you are doing EAP PEAP or EAP TLS it is mostly likely cert issue. Please run the following debugs and post the output. >config session timeout 30> debug cl...
Another possible reason :Some of the 1231 Access Point use SSC (Self SIgned Certificate). Ensure that you do have that SSC hash on both the controllers associated with the MAC. Without it the 1231 will not join.