Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I have router 3845 configured with "no service password recovery" which means service password recovery function disabled. How can I recover its password
Hi all,Please I need to understand how I can configure 3 VLAN's on 3750 Switch act as core connected to 2950 as edge switches. DHCP, DNS, & F&P servers connected on core 3750 switch. so all useres on VLAN's can access serversSecond how can I route tr...
Hi allI have PIX 506E IOS 6.0 and using VPN client ver 4. VPN client connected successfully and got IP from pool on PIX. But can't brows LAN or access e-mail serverip local pool ippool 10.10.10.65-10.10.10.75access-list 101 permit ip 168.x.x.2 255.25...
I have a PIX 506E with IOS VER 6.1 up and running without any problems from more than year. And now if it powered off, it didn’t boot. And when I open the chasse and clear its CMOS battery using jumper beside the battery, it boots o.k. and running wi...
Thanks for All of youI did all what u said before and after your reply's without success to recover the password. are there any other solution or this router should returned back to Cisco?Thanks
access-list no-nat permit ip 10.10.10.0 255.255.255.0 20.20.20.0 255.255.255.0 access-list no-nat permit ip 20.20.20.0 255.255.255.0 10.10.10.0 255.255.255.0Hi paj,This my access-list joind with nat 0, there is no port used or denyif u need all confi...
