Hi,at the moment I am setting up a new video infrastructure. All components have the lateste software.- SX-Endpoints are registered to CUCM- CUCM has SIP trunk to conductor- Ad.Hoc and Rendezvous conferences are working- TS is managed by Conductor- S...
Hi,a customer want a user which has view-only rights on his catalyst switches. I created a user whit privilige level 7.If you log into the CLI everything is fine. But by trying to log into the web page the system wants a level 15 user.Is their any po...
I found the solution. I had configured the SIP settings on TelePresence Server to use TCP instead of TLS. As soon as I changed the protocol, the calls worked fine.
Hi Patrick, on the Telepresence Server I see2037 00:15:33.006 APP Info call 150: tearing down call to "1234@192.168.100.10" - destroy at far end request; timeout 2036 00:15:33.006 CMGR Info call 150: disconnecting, "1234@192.168.100.10" - timeout 2...
Hi everyone,I have also uploaded the COP file to a CUCM 6.1(3). Now when I configure a phone I don't have the option to set the primary phone.I also have a CUCM in Version 7.1(5) and there we have the option to use the primary phone.Any ideas?Regards...
