About eddychristian10

eddychristian10 · 04-05-2016

Hi, I have an issue where our internet traffic can suddenly go down and either we need to flap the interface or restart the modem connected to the interface. I can see some CRC increasing during peak period. I can confirm the duplex and speed are the...

eddychristian10 · 03-14-2016

Hi, I would like to know how the AIR-CT2504-HA-K9 license works. We have 1 2504 as standby controller now with no AP license and primary controller 2504 with 25 AP licenses. If i want to purchase AIR-CT2504-HA-K9 for the standby controller 2504, do i...

eddychristian10 · 03-01-2016

I have configured AAA authentication using RADIUS in N9k. It works fine for first login but after that it fails. I suspect because the user-account in n9k cached it as network-operator. After the first login, i configured the radius server to reply u...

eddychristian10 · 07-01-2014

Hi,I just set up a log trap to syslog in case anything happens with the fan or temperature.Is there any Cisco document that tell the temperature threshold for Cisco ASA 5520 ?thanks

eddychristian10 · 04-07-2016

Hi, thanks for the reply. I will try the dhcp option. It is definitely better to do this method instead of using outgoing interface. Attached the running-config. i will try to grab the show tech. it's a simple router config doing NAT to internet.

eddychristian10 · 03-18-2016

it's a normal WLC 2504 with no AP license and not purchased through HA-SKU, can i convert it to HA n+1 after upgrading to version 7.6? I checked from the ccw as well, there's no difference for AIR-CT2504-HA-K9 and AIR-CT2504-K9 in terms of the compon...

eddychristian10 · 03-18-2016

as i checked, this PID: AIR-CT2504-HA-K9 includes the new hardware for 2504. If i already have 2504 as cold standby now with no AP license, which license do i need to purchase for n+1 HA setup? or do i just need to upgrade to version 7.5 or above and...

eddychristian10 · 03-17-2016

another question, if the primary fails and my APs join the secondary controller. After 90 days, what will happen other than the controller will generate syslog regarding the license? Any impact to wireless traffic?

just for anyone who is having · 03-14-2016

just for anyone who is having the same problem. It's caused by a bug. https://supportforums.cisco.com/discussion/12763251/how-could-remove-cache-user-account-nexus-9k

Member Since	‎07-01-2011 02:49 AM
Date Last Visited	‎08-18-2017 04:03 AM
Posts	11

User Statistics

User Activity

CEF not running even though enabled globally

WLC 2504 AIR-CT2504-HA-K9 licensing question

Remove user-account in n9k from AAA remote auth

Cisco ASA 5520 temperature threshold

Hi,

it's a normal WLC 2504 with

as i checked, this PID: AIR

another question, if the

just for anyone who is having