Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I have a kind of a unique problem. I have a UC520 installed with 3 PSTN lines plugged into the FXO ports. The problem is that one of the lines is not passing Caller-ID information, while the other 2 are. I've verified that caller-ID information is av...
I have a customer that wants to install a new phone system. They have about 25 employees in the office, and another 80 external users.The internal users will each have a phone on their desk, where the external users will simply have any call for them...
I have a 7942G that I want to configure to vpn into a UC540. The problem I'm having is that when I go to Security Settings, and try to enable the VPN setting, it says that the Enable key is Not Active Here. So, I can't enable the VPN feature of the p...
I have a multi-site configuration with UC540 at the primary, and UC520 at the secondary.The primary receptionist is at the primary site. There is a 7961 with 7914 sidecar on the receptionists desk. My question is, is there a way to put extensions fro...
This may not initially sound like a UC500 issue, but please be patient with the description.I have a customer that has 2 sites, primary and secondary. They were initially connected via vpn using ASA5505, and all phones registered to a single UC540. P...
You pretty much have it right.........With a twist. I can get on the terminal server at the primary site and can send a test page to the printer at the remote site every time. Someone else suggested maybe packets are getting dropped because the MTU s...
Thin clients are at the remote site, Terminal server is at the main site. Printers are defined on the Terminal Server, so printing across sites in that way.Yes, connecting via IP address. Seems test sheets always work. Testing some other types of pri...
I have 2 printers at the remote site.I can ping both IP addresses from the main site.I can reach 1 printer HTTP interface from the main site, but not the otherI can reach both printers HTTP interface from a device co-located with the printerHave not ...
Hey Alexander,Thanks for the help. I found my problem today. The workstation that I was running the CCA on had an incorrect default gateway, so it wasn't pointing to the UC540 which is why the timeout was occurring. I added a default route on the wor...
Well, that almost worked. I copied the zip file to the local workstation where CCA is running, selected it in the tool, selected 7914 to load, and then after several minutes got the following error:Accessing tftp://192.168.1.105/2709489136938......%E...
