Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi, In a Nexus 7000 after upgrading from 4.1(5) to 5.2.3(a), we have a N7K-M148GT-11 module in powered-dn.I'm not sure if it is a HW problem, or software.Any help, thanksNEXUS_Qro_MAN02# sh logging last 152013 Oct 18 00:55:49 NEXUS_Qro_MAN02 %PLATFOR...
Hi Experts,I just implemented HA on a pair of WLC 5508, both with valid AP licensees (500 one od them and 50 the other). The HA AP SSO configuration is working properly, and after forcing the switch-over, the secondary WLC comes up and everything sti...
Hi,I have a problema with DHCP. I have two 2960 connected with a port channel on ports 47 and 48 as trunk with native vlan 10. I only have this one vlan. In port 1 of sw 1, I have a C800 as DHCP server. I have an AP autonomous witrh single ssid on vl...
Hi,I would like to know te range of mac address used for only Cisco Wireless, and I would appreciate to know how the ap and the controler assign the virtual mac address they use and how to get them from the WLC gui.WLC - 4400AP - Air1131Thanks
Hi, I solved it, I was missing "inspect icmp error" on class inspection_default, by the way, confighuring: icmp unreachable rate-limit 10 burst-size 5and class class-default set connection decrement-ttl Will show the asa as a hop
Hi, I tried but it is not working Please any helpaccess-list outside _in extended permit icmp any any time-exceededaccess-list outside _in extended permit icmp any any unreachableaccess-list outside _in extended permit icmp any any traceroute outsi...
