Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello Team,
I had working LDP session stopped suddenly & not able to find the exact root cause as Cisco & service provider both are saying it's not their issue.
It was between 2 WS-C6506-E & LDP session stopped suddenly , my other traffic over link i...
Hello Team,
Below is ISIS database but output i can see the routes & neigbour UP, but it's not showing in routing table.
What should be my next step.
I am able to see all routes of R1 in R2
R1#show isis database R2.00-00 detail
Tag area_0041:
IS-IS L...
Hello Team,I am ran in to wierd problem here , below is my simple topologie.
R1 (Lo0 - 192.168.254.204)<=> R2 (Lo0-192.168.254.27)<GRE> R3 <=> R4 <=> R5 <=> R6 <=> R7 (Lo0-192.168.254.160)
We are running is-is as igp & mpls is enbled on routes.
Goal ...
Hi Team,My goal is to achive that if the CPU utilization is greater than the 50% run the "undubug all" commandTo avoid the high tilization due to debug (I know that the access - list should be used for the same , but i want to achive this)Below is my...
Hello Nagendra,
Thank for acknowledgement ; below is the output , let me know if you need more info
A#
show moduleMod Ports Card Type Model Serial No.--- ----- -------------------------------------- ------------------ ----------- 1 24 CEF720 24 port...
