About dprzywara

dprzywara · 04-15-2014

I've had the same issue and have had a TAC case open for about 2 months now. We noticed the issue only occurs when the 8945 is running 9.4.1 firmware. If possible, you can get some temporary relief by downgrading the 8945 to 9.3.4 or lower. We dow...

dprzywara · 02-14-2013

This is great news! The fact that we can't sync UPM-BE with CUCM is a major reason we never deploy it at customer sites. Do we know if there is any way to get the entitlement from the start with fresh installs of BE6Ks? Our experience is UCSS and ...

dprzywara · 02-14-2013

How do we license full blown PCP for a BE6K install? For instance, with UPM-BE 9.0, per the quick start guide you have to set a static MAC on the virtual machine to get the free license. Would it be the same process for PCP? Below is a link to the...

dprzywara · 01-30-2013

I suspect you might be missing the following command on your ASA: same-security-traffic permit intra-interfaceBelow is a blurb from the ASA CLI guide about the setting.

dprzywara · 05-22-2012

Is your ephone-template 1 applied to the ephone?

Member Since	‎06-18-2008 11:56 AM
Date Last Visited	‎10-31-2024 05:13 AM
Posts	160
Total Helpful Votes Received	5

User Statistics

User Activity

I've had the same issue and

BE6K - Is there a way to import Existing CUCM Config into the BE

BE6K - Is there a way to import Existing CUCM Config into the BE

Jabber with ASA AnyConnect spoke to spoke communication

Re: Hold button does not work in 6900 series IP Phones