Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi,
I configured the ASA 5506 in transparent mode to pass and inspect traffic between ADSL router and internal users, i noticed that users were able to get ip addresses from the ADSL router but no traffic is passed, please check configuration and fe...
Hi, i'm planning to upgrade our CUCM installation to newer version so would you please assist me clarifying some points:
CUCM current version: 10.5.2.10000-5
CUP current version: 10.5.2.20000-1
New version: 11.5
- What kind of upgrade do i need st...
Hello,
I'm performing a migration for only CUCM from MCS 8.6 cluster to UCS 10.5 cluster.
Issue: i can't set dns servers and domain name in the migration cluster, old cluster doesn't include any dns information, i attached a screenshot that shows set...
Hi guys, i have a requirement to setup auto attendant only no need to setup voice mail now.
I have CUCM , CUC servers i don't know all steps but can you please guide me if these configs are not ok :
I wonderig do i have to configure voice mail ports ...
Hi I have different vlans spread out edge switches, recently i had issues with a specific vlan. some switchports that are assigned to this vlan stop working, they appear connected ( green ) but don't respond to ping requests even with clients on th...
Hello Felipe , i can't ping from router itself to internet not from inside zone , but there is another thing to mention that when i show access-lists i see. This is the ACL which added to self to outside zone pair , so i suspect the returning traffi...
Hello jcarvaja thanks for help i did as what you said i've created self to outside zone pair but the problem is not solvedwhen i try internet addresses a line is logged saying000030: *Apr 10 07:23:42.543 UTC: %FW-6-PASS_PKT: (target:class)-(SELF-OUTS...
