Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi,On old nx-os like 7.0(8)N1(1) local admin users were not able to login to the device when tacacs+ is working. This behavior seems to have changed on newer version like 9.3.10 and 10.2.4 for examples. Indeed, with same configuration than older vers...
Hi we are facing a memory issue and the bootflash: is totally full. Therefore the ISR4331 running on version 16.12.6 is rebooting in a loop. From rommon I'm not able to clean flash: as there isn't any commany "del" "delete" "erase" "format" or even ...
Hello all, I'm trying to configure Layer3 subinterfaces on port-channel on a C9500-48Y4C with version 16.9.4. However it seems the feature is not enabled or supported. When I try to apply this interface Port-channel10.3000encapsulation dot1Q 3000ip a...
Hi All !
It is very easy to use interface templates to add configurations to interfaces but how to configure template to remove configurations from an interface.
For example, consider an interface that has been configured by default with a servic...
Hi all,
in a classical and normal ISE - NAC design is it possible to send different downloadable ACL for a same device depending of where it is connected ? I mean for example :
- Laptop X connected in vlan 100 (IP range 10.10.10.0/24) : get download...
HiI might have not been clear enough in the description. As mentioned the "local" keyword allow me to run all command for local user. My issue is that the local user can authenticate on the device when tacacs is working. When tacacs is well working t...
HiIn my case this was an hardware issue that caused the looping reboot. RMA, no other choice. However in ROMMON the command to remove any file doesn't exist anymore.
Hi, thanks for your replies but to answer posts that suggest to delete files, again, this is the topic here : I can't delete anything because : 1. I'm not able to boot the IOS2. I'm in ROMMON3. There isn't any command in the ROMMON to delete anything...
