Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Yesterday I had to configure a Cisco 891F router as an internet access router with PPP authentication.
Behind this router, a firewall will do NAT and routing.
After configuring the PPP on a dialer interface I receive an IP-address, subnetmask and d...
Hi,
I have a strange situation I'll explain.
Several days ago a customer got their new internetconnection, /30 for WAN and a routed /29 subnet.
My colleague went to the customer, changed everything and everything worked well.
Now we used one IP-addre...
Hi,
I have a problem with a VTP v3 configuration.
The customer has several sites with Cisco 3750X switches. Last they moved their core infra to a datacenter with a earlier used 3750X stack switch.
I had to add some new vlans to this core switch, so ...
HiLast week I installed a brand new Cisco 3650 switch and the wireless option.Everything works fine.I also configured tacacs+. Login through SSH works fine.Now I want to manage the wireless part from the GUI bij entering https://ip-address/wirelessLo...
Hi there,I have a small problem, but I can't understand why it isn't working as a I wanted to have.The situation in short:I have a provider routerPublic IP: 87.x.x.xInternal IP: 192.168.1.1 /24An ASA5505 connected to vlan1Public IP: 192.168.1.254 /24...
There's no need to use the bridge-group.
In a other forum I saw someone configuring a bridge-group.
I forgot to delete it.
That's why some said you need to have a layer 3 interface.
What does the NCP do then?
I have no remote access to the rout...
I added the NAT rule you mentioned.
nat (Inside,Outside-glas) source static Mailserver-SMTP Mailserver-SMTP destination static MAIL-OUTSIDE MAIL-OUTSIDE description MAIL on row 13
I checked the cloud spamfilter, still the same outside IP-address.
