Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello,
Getting the "Profile Installation Failed, The request timed out." error when provisioning a client on a new wireless BYOD service.
My best guess is that there's an ACL issue, and I am having a hard time finding a doc where a Converged Access ...
Have an HA 5760 Foreign MC Pair, 5760 Anchor and a 3850 MA. All running 3.7.3E software.
Client connects to guest SSID served from AP registered to MA. Associates, gets DHCP IP address fine, but the client browser pop/prompt doesn't occur. On an i...
Hello,
A scenario I hadn't run across before.
The customer has an existing Foreign-Anchor WLC set up with their Guest WLAN running across it.
They want the new BYOD service to do the same thing (not sure the point of it). When I anchor the WLAN to t...
Having a heck of a time getting this to work.First option is for the device to try and authenticate using Dot1X/EAP-TLS - for domain-connected devices only.If that fails, they want the option to pop a CWA portal where they can enter either AD creds, ...
I have a customer that has users with company-issued MacBook Pros. They want to implement ISE for Wireless 802.1X access control, using EAP-TLS. The challenge is certificate distribution to the Mac client device. The customer's preference is to ha...
If there were 2 HA pairs; each pair in a different data centre, does each HA pair need it's own "pool" of capacity licenses? ie. if a total of 500 APs, each pair needs 500 C1 Foundation Wireless licenses, for a total purchase of 1000. TIA
Hi Neno,
1. This is the external Guest certificate for the multi-role portal that serves sponsored guests and BYOD clients
2. Signed by external 3rd party - Digicert. Not sure the template they used
3.
SubjectCN=guestaccess.aer.ca,O=Alberta Energy Re...
**UPDATE***
Opening port 8905 allowed the profile push to begin, but now the client gets the error below. The portal the BYOD clients use is used for sponsored, external guest access as well and just branches out from there. If the credentials enter...
Hi Neno,
Thanks for the response.
ISE is version 2.0 patch 3
The switch is a 3850 MA, the WLCs (foreign and anchor) are 5760s, all running 3.7.3E code.
The iOS device is an iPhone 6 s/w version 9.3.1
With an Android device, it appears to lock up at t...
