Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi there, is there a way of monitoring CER for unallocated phones?Searching for snmp + CER shows up tons of replies because snmp is one of the core items of the CER (used to allocate phones), but I could not find which CER parameters can be monitored...
Hi all,I have a very urgent question regarding the item no for a memory upgrade of a WS-X6K-SUP1A-2GE.Does anyone know it? We have to replace a complete 6506 and need to upgrade the memory.I couldn´t find anything on the cco nor in our price-lists.th...
Regarding the first issue:We have had a similar issue that a call dropped on a h.323 gateway after 5 mins, and a firewall dropped h.323 packets after 5 mins. If there is a fw in between, check h.323 timers and temp turn off h.323 inception.regards, K...
There is no default username/password it is set at the end of the installation process, at least that is what the documentation says...http://www.cisco.com/en/US/products/sw/voicesw/ps5520/products_password_recovery09186a008042aa29.shtml#topic1If a u...
Hi Leonardo,I would configure a few dial-peer like this:dial-peer voice 1110 potsdescription emergencydestination-pattern 015.port 0/0/1:0prefix 15this matches 015X where x is any digit (0-9). So this also works for 156, 154, 158dial-peer voice 1111 ...
Hi Leonardo, ok, if you add the dial-peer I mentioned, just to it like this:dial-peer voice 1110 pots description emergency destination-pattern 015. port 0/0/1:0 prefix 15Just leave the corlist command, because emergency calls should available usuall...
Hi Leonardo,to me it looks like no dial-peer is matching "0156".Can provide the output of the "show dialplan-numer 0156" command?With that output you can see if any dial-peer could match the 0156.I do not understand your config, because there are a l...
