Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi AllI've an ASR1001 with 15.1(2)S code on it connected to out ISP, we've been get some complaints about performance and I'm seeing drop on the output policy. Checking the bandwidth consumption we have plenty spare when drops are occuring, there's 3...
I have to physically move a Callmanager subscriber and would like to know how best to shut it down with minimum impact. The cluster is running 8.0.3. I know we can just shut down the server via the cli but was hoping we could do this in a more contro...
We have a solution where user vpn to a router and use cert's for authentication. This works fine but there is no record of who's logged in and for how long, what's the best practice for logging the accounting information?
I have in the past downloaded the webauth bundle to a wlc 5508 running 7.0.98 successfully. I am trying to upload a new bundle after modifying the AUP but I get an error after the download to the wlc.The error with FTP or TFTP is % Error: Webauth Bu...
I have a pair of 5520s running 8.2(3) in failover active/standby, routed mode. I have an issue with SSH as it's stopped worked after a short time, less than 8hrs during the network being installed, telnet is working fine as is https/asdm. I have re-c...
Hi PaulWas also reading this doc it's very good. So if I have 8 low latency queues do these share the 512 limit? Looks like I need to redefine the queues as non LLQs as a starting point anywayRegardsPatrick
Thanks for this, I was a little curious about the LLQ on all the queues as we don't have any voice or video on this. How do I check the class queue limits vs the interface hold queue?Thanks
Hi GuysJust re-ordered the priority in preparatoin of shutting down the sub tomorrow and I get a message that I have to reboot all the devices. Is this expected?
