Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I have a Cisco 3802E running 8.2.151.0 I wan to upgrade it to AIR-AP3800-K9-ME-8-10-130-0. AP Running Image : 8.2.151.0Primary Boot Image : 8.2.151.0Backup Boot Image : 0.0.0.01 Multigigabit Ethernet interfaces1 Gigabit Ethernet interfaces2 802.11 R...
Hey guys. I am writing a provisioning script to do everything I need for switches and AP. Is there an API call to set the IP address info for a switch?TypeIPVLANSubnet MaskGatewayPrimary DNSSecondary DNS
I have a multi-path network running EIGRP. For some reason, when I look at the EIGRP accounting, I see that on Route A at a site learned 500+ routes from upstream and Router B only learned 260. Furthermore, Router A only has 9 prefixed learned fro...
Here is the set up. I have two routers for redundancy between them. They connect to my corportate networe via GRE tunnels using DMVPN as part of a /24 network.For the redundancy between them, I am running HSRP. To trigger the failover, I am tracki...
Thanks. Are you using CoA with ForeScout? Do you have the span port going to ForeScout? Are you using an agent?Sorry for the tons of questions. If you don't want to put this all out in the forums, you can send me a PM.Chris
Adam,We are doing so much more with Cisco ISE now. For non standard devices, we are using MAC authentication and profiling. Management wants to move to Forescout, so I am wondering if anybody has used Meraki and Forescout.
There is 600 Sites. I can't double the routing table by adding a management subnet. There is already going to be a heap of automation and scripting. In the end, all a person will do is put in the ADP Site code and serial numbers, and everything els...
WANKiller, that is what I was afraid of. I think I am going to have to call out to my DHCP server to find out the subnet for that site off a common tag in both IPAM and Meraki. Then I will take the MAC address from adding the device in Meraki to go ...
There will be a mix of devices. Some switches, some APs. And since we aren't going to be a 100% Meraki Shop, we still need to make sure there is a difference.
