Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I know that the virtual wireless controller connected AP's have to be in Flex Connect mode. My question is do all associated wlan's have to be locally switched or can any of them be centrally switched? If they can, can someone offer me some configu...
Attached is a current network diagram. The wireless point to point links between the switches are 5.8Ghz radio's. All switches are Cisco Small Business 200 24-port POE.I first turned up switch A, B and C but only had wireless links A and B connecte...
Can someone please explain to me the need for 500 gb of disk space for the AD Agent. This seems like an incredible waste of resourses, especially if you are designing an implementation with a backup agent running...that's a terabyte of disk space ne...
I am in the testing phase of configuring my ASA for user-identity. I have ldap setup and working along with the ad-agent. I can create and successfully use policies based upon user-id logon etc. My problem is the firewall user database marks me as...
I am attempting to setup LDAP authentication for my ASA, along with the AD Agent. Currently my authentication is failing with the following output from debug...[-2147483610] Session Start[-2147483610] New request Session, context 0xcc854d8c, reqType...
The DHCP server for this vlan (765) is the upstream switch 192.168.65.33, which also happens to be the default gateway. From that switch I can ping the dynamic interface... I agree that something is blocking, at this point, I just don't have a clue...
I have just verified with our Systems Engineers that the ESXi host is set to promiscuous mode for the data port of the vWLC. I'd like to set up a dhcp scope on the vWLC but it appears that it doesn't support it. I don't see the option in the Web GU...
Thanks for your response. I've made the changes you suggest and its made no difference on connecting. If I statically assign and ip address to the client I can ping the dynamic interface ip address (192.168.65.35). And from an upstream switch inter...
output from show wlanWLAN Identifier.................................. 2Profile Name..................................... Annex-GuestNetwork Name (SSID).............................. CityGuestStatus........................................... EnabledM...
I've done that but it doesn't seem to work. I can't connect to the SSID I'm broadcasting for the Centrally Switched wlan. I'm not sure if there is some special configuration that is needed. The VMWare configuration is set correctly per the documen...
