I have recently purchased a 3560x switch with IPServices software on.(or so I thought) How can I ensure that the license is active and not going to default to IP base? The provider ensures me that the license has been paid for and on the switch. #sh license det Index: 1        Feature: ipservices                        Version: 1.0         License Type: Evaluation         License State: Active, Not in Use, EULA not accepted             Evaluation total period: 12 weeks 6  days             Evaluation period left: 12 weeks 6  days             Period used: 0  minute  0  second          License Priority: None         License Count: Non-Counted         Store Index: 0         Store Name: Index: 2        Feature: ipservices                        Version: 1.0         License Type: PermanentRightToUse         License State: Inactive             Period used: 0  minute  0  second          License Priority: None         License Count: Non-Counted         Store Index: 1         Store Name 1#sh license Index 1 Feature: ipservices             Period left: 12 weeks 6  days         License Type: Evaluation         License State: Active, Not in Use, EULA not accepted         License Priority: None         License Count: Non-Counted Index 2 Feature: ipbase                 Period left: 0  minute  0  second  #sh license feature Feature name             Enforcement  Evaluation  Clear Allowed  Enabled RightToUse ipservices               yes          yes         yes            no    yes     ... View more

Hi I have a user who has over 100 messages in his voicemail box. What is the easiest way of deleting these all at once? ... View more

I have just installed a CEF720 8 port 10GE with DFC   WS-X6708-10GE card in an existing 6509E Chassis and it shuts down due to inadequate cooling. I have another 6509E Chassis with exactly the same setup and it works ok with that. Both are brand new. The one transfers to High power mode and the other fails when trying to swap to restricted mode. *Mar  5 13:55:38.527: %C6KENV-SP-4-FANHPMODE: Fan-tray 1 is operating in high power mode *Mar  5 13:55:38.535: %C6KENV-SP-4-INSUFFCOOL: Module 9 cannot be adequately cooled *Mar  5 13:56:38.787: %C6KENV-SP-3-FANMODEFAIL: Fan-tray 1 mode change failed #sh env cooling fan-tray 1:   fan-tray 1 type: WS-C6509-E-FAN   fan-tray 1 mode: Restricted-power   fan-tray 1 fan-fail: OK chassis per slot cooling capacity: 70 cfm ambient temperature: < 55C   module 1 cooling requirement: 30 cfm   module 2 cooling requirement: 30 cfm   module 3 cooling requirement: 30 cfm   module 5 cooling requirement: 35 cfm   module 8 cooling requirement: 70 cfm   module 9 cooling requirement: 84 cfm environmental alarms:   no alarms backplane:   operating clock count: 2   operating VTT count: 3   operating fan count: 1 fan-tray 1:   fan-tray 1 type: WS-C6509-E-FAN   fan-tray 1 mode: Restricted-power   fan-tray 1 fan-fail: OK VTT 1:   VTT 1 OK: OK   VTT 1 outlet temperature: 0C VTT 2:   VTT 2 OK: OK   VTT 2 outlet temperature: 0C VTT 3:   VTT 3 OK: OK   VTT 3 outlet temperature: 0C clock 1:   clock 1 OK: OK, clock 1 clock-inuse: in-use clock 2:   clock 2 OK: OK, clock 2 clock-inuse: not-in-use power-supply 1:   power-supply 1 fan-fail: OK   power-supply 1 power-input: AC high   power-supply 1 power-output-mode: high   power-supply 1 power-output-fail: OK power-supply 2:   power-supply 2 fan-fail: OK   power-supply 2 power-input: AC high   power-supply 2 power-output-mode: high   power-supply 2 power-output-fail: OK module 1:   module 1 power-output-fail: OK   module 1 outlet temperature: 27C   module 1 inlet temperature: 23C   module 1 device-1 temperature: 27C   module 1 device-2 temperature: 23C   module 1 VDB outlet temperature: 25C   module 1 VDB inlet temperature: 24C   module 1 VDB device-1 temperature: 25C module 2:   module 2 power-output-fail: OK   module 2 outlet temperature: 26C   module 2 inlet temperature: 23C   module 2 device-1 temperature: 27C   module 2 device-2 temperature: 24C   module 2 VDB outlet temperature: 25C   module 2 VDB inlet temperature: 23C   module 2 VDB device-1 temperature: 25C module 3:   module 3 power-output-fail: OK   module 3 outlet temperature: 27C   module 3 inlet temperature: 23C   module 3 device-1 temperature: 28C   module 3 device-2 temperature: 23C   module 3 VDB outlet temperature: 23C   module 3 VDB inlet temperature: 22C   module 3 VDB device-1 temperature: 25C module 5:   module 5 power-output-fail: OK   module 5 outlet temperature: 32C   module 5 inlet temperature: 21C   module 5 device-1 temperature: 26C   module 5 device-2 temperature: 29C   module 5 asic-1 temperature: 51C   module 5 asic-3 temperature: 35C   module 5 asic-4 temperature: 46C   module 5 RP outlet temperature: 25C   module 5 RP inlet temperature: 26C   module 5 EARL outlet temperature: 28C   module 5 EARL inlet temperature: 23C module 8:   module 8 power-output-fail: OK   module 8 outlet temperature: 23C   module 8 inlet temperature: 22C   module 8 device-1 temperature: 20C   module 8 device-2 temperature: 24C chassis connector rating: 1302.00 Watts (31.00 Amps @ 42V) chassis auxiliary connector rating: 2016.00 Watts (48.00 Amps @ 42V) module 1   module 1 connector rating: 1260.00 Watts (30.00 Amps @ 42V)   module 1 vdb connector rating:  850.08 Watts (20.24 Amps @ 42V)   module 1 power consumption:  132.72 Watts ( 3.16 Amps @ 42V) module 2   module 2 connector rating: 1260.00 Watts (30.00 Amps @ 42V)   module 2 vdb connector rating:  850.08 Watts (20.24 Amps @ 42V)   module 2 power consumption:  132.72 Watts ( 3.16 Amps @ 42V) module 3   module 3 connector rating: 1260.00 Watts (30.00 Amps @ 42V)   module 3 vdb connector rating:  850.08 Watts (20.24 Amps @ 42V)   module 3 power consumption:  132.72 Watts ( 3.16 Amps @ 42V) module 5   module 5 connector rating: 1260.00 Watts (30.00 Amps @ 42V)   module 5 power consumption:  338.10 Watts ( 8.05 Amps @ 42V) module 8   module 8 connector rating: 2016.00 Watts (48.00 Amps @ 42V)   module 8 power consumption:  125.16 Watts ( 2.98 Amps @ 42V) module 9   module 9 connector rating: 2016.00 Watts (48.00 Amps @ 42V)   module 9 power consumption:  444.36 Watts (10.58 Amps @ 42V) chassis per slot cooling capacity: 70 cfm ambient temperature: < 55C   module 1 cooling requirement: 30 cfm   module 2 cooling requirement: 30 cfm   module 3 cooling requirement: 30 cfm   module 5 cooling requirement: 35 cfm   module 8 cooling requirement: 70 cfm   module 9 cooling requirement: 84 cfm *Mar  5 13:55:38.527: %C6KENV-SP-4-FANHPMODE: Fan-tray 1 is operating in high power mode *Mar  5 13:55:38.535: %C6KENV-SP-4-INSUFFCOOL: Module 9 cannot be adequately cooled *Mar  5 13:56:38.787: %C6KENV-SP-3-FANMODEFAIL: Fan-tray 1 mode change failed #sh mod Mod Ports Card Type                              Model              Serial No. --- ----- -------------------------------------- ------------------ -----------   1   48  SFM-capable 48 port 10/100/1000mb RJ45 WS-X6548-GE-45AF   SAL1335XN4J   2   48  SFM-capable 48 port 10/100/1000mb RJ45 WS-X6548-GE-45AF   SAL1336Y10M   3   48  SFM-capable 48 port 10/100/1000mb RJ45 WS-X6548-GE-45AF   SAL1539QUPY   5    5  Supervisor Engine 720 10GE (Active)    VS-S720-10G        SAL1532LPPY   8   24  CEF720 24 port 1000mb SFP              WS-X6724-SFP       SAL1227WDGA   9    8  CEF720 8 port 10GE with DFC            WS-X6708-10GE      SAL1746G73Z Mod MAC addresses                       Hw    Fw           Sw           Status --- ---------------------------------- ------ ------------ ------------ -------   1  0027.0d00.2910 to 0027.0d00.293f  12.5   7.2(1)       12.2(33)SXJ  Ok   2  0027.0d00.2880 to 0027.0d00.28af  12.5   7.2(1)       12.2(33)SXJ  Ok   3  44d3.ca8b.bed0 to 44d3.ca8b.beff  12.7   7.2(1)       12.2(33)SXJ  Ok   5  68ef.bd83.524c to 68ef.bd83.5253   4.0   8.5(4)       12.2(33)SXJ  Ok   8  0021.d88c.1e10 to 0021.d88c.1e27   3.2   12.2(18r)S1  12.2(33)SXJ  Ok   9  c067.afc4.09b8 to c067.afc4.09bf   3.6   Unknown      Unknown      PwrDown Mod  Sub-Module                  Model              Serial       Hw     Status ---- --------------------------- ------------------ ----------- ------- -------   1  IEEE Voice Daughter Card    WS-F6K-48-AF       SAL1336Y0SH  2.4    Ok   2  IEEE Voice Daughter Card    WS-F6K-48-AF       SAL1336Y01P  2.4    Ok   3  IEEE Voice Daughter Card    WS-F6K-48-AF       SAL1538QHUV  2.5    Ok   5  Policy Feature Card 3       VS-F6K-PFC3C       SAL1531L4CR  1.1    Ok   5  MSFC3 Daughterboard         VS-F6K-MSFC3       SAL1531LH76  5.1    Ok   8  Centralized Forwarding Card WS-F6700-CFC       SAL1227W50M  4.1    Ok   9  Distributed Forwarding Card WS-F6700-DFC3C     SAL1744FFSW  1.6    PwrDown Mod  Online Diag Status ---- -------------------   1  Pass   2  Pass   3  Pass   5  Pass   8  Pass ... View more

       hh ... View more

Hi, I have a 3750X stack with a dula  layer 3 link back to the core. There are 4 switches in the stack running Version 15.0(2)SE2 PCs using SAP frequently drop the connection  to the server in the USA. This only happens on this switch stack, i have patched in another switch with a layer 2 link back to the core and the same users have no SAP drops on this. I have upgraded the IOS, replaced the stacking cables, replaced the fibre modules, took wireshark captures and sent them to Cisco TAC. Can anyone suggest another way to troubleshoot this? Thanks         ... View more