Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi mates,I am trying to test OpenConfig/NetConf with YANG Development Kit on my local test bed. The IOS-XRv 6.1.2 nodes along with Ubuntu Servers are mounted on vSphere host and the proper connectivity. I followed the steps to install YDK-Gen along w...
Hello the network community,I am migrating PPPoE services from Junos to Cisco IOS-XE and to achieve this I have created multiple VRFs on the ASR1001-X to separate the forwarding plane and the control plane for the different customers using this servi...
Team,I would need your urgent help here. There is an odd behavior observed on the ASR1000 where the IP routing is automatically disabled every 2 hours and the routing config wiped out. It occurs on three ASR1000, two having an ESP of 2.5Gbps and the ...
I enable on Cisco 3750 and all of sudden I was not able to login into the box. I even changed the source interface and update the transport input method under the VTY lines, no luck. Then I choose to disable SSH by removing the pertaining configs li...
I would like to get a recommendation for the license needed on the ASR9001 in a Small/Medium Service Provider network. I am a little confused between A9K-9001-AIP-LIC and A9K-IVRF-LIC. As I am pretty sure the ISP will use MPLS/RSVP-TE/VRF. Any though...
Yes it worked very well on Ubuntu. Please refer to this link for reference : https://community.cisco.com/t5/xr-os-and-platforms/netconf-and-yang-deployment-guide-on-ios-xr-ios-xe-and-nx-os/td-p/3186215
Hi Jim,Culd you please share the outcome of your testing ? I am doing the same testing on IOS-XR platforms and I am facing some issues with NETCONF and YANG. Thanks
Hi abhirame, Thanks for the quick response.I used the following steps to install YDK Packages on my Ubuntu Server 14.06. Am I missing something ?Procedure to install YDK on Ubuntu (Debian-Based)Install ydk-gen through the following steps Install pre...
Hello Xander,
What do you recommend to achieve for effective ECMP with Auto-Mesh TE tunnel. I have setup this environment where the overlay topology handled by MPLS TE provides the forwarding plane for IPv4 and VPNv4 traffic. All the CEs are multi-ho...
