I would need your urgent help here. There is an odd behavior observed on the ASR1000 where the IP routing is automatically disabled every 2 hours and the routing config wiped out. It occurs on three ASR1000, two having an ESP of 2.5Gbps and the other with an ESP of 5Gbps. There is 01x10G interface on each of ASR1001 and 03x10G on the ASR1002 and I am not sure if the license for 10G has been installed prior the installation of the SPA cards.
Hi Everyone, Would like to extend my thanks in advance for anyone offering assistance. As the subject hints, anyone here know of a way to convert IOS configs to XR config? I seen and heard about SOX tool but i am unable to find it. I also tried ...
When I run the command 'sh controllers fabric fia q-depth location 0/0/CPU0' or any 0/X/CPU0 and see the following, what exactly does it mean? RP/0/RSP0/CPU0:Router#sh controllers fabric fia q-depth location 0/0/CPU0********** FIA-0 **********Categor...
Symptoms: the root password can't log in by GUI Solution:1) login CLI as admin2) write command "ncs webroot enable" without qutations3) we can check the status by "ncs webroot status" hope this will help someonethanks
ISO images are as close as we can get to the old school classic IOS images from back in they day.
Doing upgrades by putting a new image on the flash, changing the boot pointer and reload was and is still the walhalla of Cisco based devices.