Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi, guys. I am wondering if there is a way to upload a prerecorded greeting audio into Unity connection. The only way I am sure is to just use a IPT or PC to record youselve's voice into it. But anyhow it is not usually the audio clients need. They w...
Hi,guys,I have a switch one of whose interface shows this:FastEthernet0/14 is up, line protocol is up (connected) Hardware is Fast Ethernet, address is 1011.1134.30ce (bia 1011.1134.30ce) MTU 1500 bytes, BW 100000 Kbit, DLY 100 usec, reliabili...
Hi,guys:A Catalyst 2955c-12 just make me mad.The client complaint that his network management software kept alarm about 4 2955c-12 in his lan. From any device I ping to those concerned devices' management IP address, there are 500 to 600 ms delay, th...
I have a ASA5505 acting as a VPN client, peering to a easy VPNserver PIX515 with version 7.2 . I have got two problems:1. Once the ASA5505 establishes isak SA with the PIX, clients behindthe ASA5505 lose their connections to the Internet;2. I have...
Thanks. Suppose that the broadcast is the key to this problem, does it mean that this 2955 have buffer defect which leads to not being able to deal with too many broadcast? Anyhow, other switches in the LAN don't have such problem. And, if IP is move...
Try to write your ACL like this:access-list 100 permit ip 10.0.0.0 0.0.0.255 x.x.x.x x.x.x.x(isp net)access-list 110 permit ip 10.0.0.0 0.0.0.255 192.168.0.0 0.0.255.255(isdn net)And then try your nat configuration like this:ip nat inside source list...
thanks.I would do it later because the devices are on the side of the client. I am still wondering that the device's problem is not unaccessible but only ping rely delay, and when telnet on it, it responds commands very slowly.
